Downloads

 

Internal Air Quality Particulate Monitoring Device Add on Unit*

ZiggyAir uses calibrated and certified wireless sensors for all its IAQ measurements. Our sensors use solidstate non-dispersive infrared (NDIR) absorption and laser scattering technology to accurately and reliably measure the IAQ. They also measure temperature and humidity.

All our monitoring devices are battery powered and have a battery life ranging from 5 to 7 years. We continuously monitor battery levels and long before they run out, we will dispatch an engineer to your premise to replace the batteries. This is done at our cost and is all part of the service. Being battery operated installation of the devices is easy and means that we don’t tie up your valuable plug sockets or have cables trailing around your building. 

In order to get an accurate reading, it is important that the sensors are placed away from doors, windows and ventilation ports. Being battery operated and wireless we can find the most accurate location for the sensor in the room.

Ensuring that the air in the building is continuously replaced with fresh clean air is crucial to diluting viral loads (including COVID19) in the air. PM is air-suspended mixture of both solid and liquid particles and is listed as ‘criteria pollutants’ by the World Health Organisation. These particles include dust, pollen and mould spores. They are separated into three classifications; PM10 (coarse), PM2.5 (fine) and PM1.0 (ultrafine) particles. High levels of PM are a clear indication of poor filter performance in the building.
Our advanced algorithms provide superior accuracy for 3 different PM types. Our sensors have an operation range of 0-1000 μg/m3. The sensors also records temperature and relative humidity. The measurement interval of 30mins is standard but more frequent measurement intervals can be requested. The devices are calibrated in the factory and there is an automatic fan-cleaning procedure triggered weekly to ensure device accuracy.

Specifications:

• Dimensions: 86 x 86 x 26mm
• Weight: 120g
• Battery: 3xAA 3c6V
• Battery life: 5 years min.
• Measurement interval: Every 30 mins (configurable)

​PM1 / PM2.5 / PM10 Sensors

• 0.3~1.0; 1.0~2.5; 2.5~10 μm
• Effective Range : 0~1000 μg/m3
• Resolution : 1 μg/m3
• Accuracy : ±15%
• Sensor : Sensirion SPS30
• Measurement Principle : laser scattering

NOTE: *Add on / replacement unit only.  For use with 020250

Optional sensors are CO2, (VOC) Volatile Organic Compounds. All also measure Temp and Humidity.

To order please call 0113 2461550 or email [email protected]

Part Number: 020252

This product can be found in:
Air Monitoring & Air Sterilisation
Air Monitoring & Filtration - IAQ
Aspli Value Products

Back to top